back thing

[1999amethyst]

well i got bored today and put this together, it makes a little more room. when I carry a lot of stuff i usually have people in the back seat so i can't put it down. It also makes it so i can hide things better, and a place to mount my six disk and inverter. It wasn't very hard and its easy to take out if needed.

its a piece of 3/4 inch sheet of MDF, and pice of gray carpeting that i rapped around and stapled underneath. and held in with 2 tie down straps.

started with this:


then this:




and now this


The inverter isn't in yet i have to take it apart to drill holes in the top plate and then screw it into the board.
_________________
99-XJ