My 93 YJ

sknuisance · Member Joined: 17 Oct 2005 Location: Texas

sknuisance · Member Joined: 17 Oct 2005 Location: Texas

I do not have any pics of it flexing since I was driving when most of those were taken, but a short run down of the mods....

High pinion 35 spline 9 inch curry rear axle with disc brakes.

High pinion dana 44 front axle out of a 66 ford 3/4 ton truck, cut down to width.

Warn axle shafts and CTMS in the front

4.56 gears, ARB front, Detroit rear,

Cage and tube front end built by FabWright in Amarillo Texas.
Custom tank also built by FabWright,

6 Point cage with 3/16th aluminum on top.

5 point harnesses

Custom Dash my buddy and I made, all auto meter gauges.

Short shaft kit on the 231,

Custom long arm suspension, also by FabWright, when we did the suspension we converted it over to coil springs,

The lift is around 7 inchs, the wheel base is now 104, I went back 7 inchs in the rear and 3 in the front,

Full Hydro stearing from PSC

Flat belly skid plate, Also from FabWright.

This had been a on going project for me since I bought the jeep in Florida back in 97..... I have broke and rebuilt and replaced about every part known to jeep at one time or another, I am sure I have forgotten some of the mods I have done but if you have any questions feel free to ask..

Code3TJ · Hacker Joined: 01 Jan 2004 Location: Uzbekistan

Looks great - do you have any future plans for it? Any engine/drivetrain mods?
_________________
Nothing to see here.

sknuisance · Member Joined: 17 Oct 2005 Location: Texas

I have a STAK T-Case shipping next week, its the new 3 speed case, as far as the moter I have alot of buds who run V-8's and they can not go anywhere I cant go....

I still drive it around town off and on, keep it licenced and insured for the night time "Sonic" trips..

Code3TJ · Hacker Joined: 01 Jan 2004 Location: Uzbekistan

Keep us posted on what you think of the Stak and how the install goes. I'm very interested in it.
_________________
Nothing to see here.

tonloco · Member Joined: 20 Apr 2005 Location: Watauga, Texas

your rig looks familiar have ever competed in Megarun at barnwell mountian?

1fox2go · Posted: Tue Oct 18, 2005 7:39 am Post subject:

still got the I6?
_________________
96 Cherokee 7.5 inch TnT long arm Locked F/R, D44 rear, 4.56s, 35x12.50 Muds/36x12.50 TSLs

sknuisance · Member Joined: 17 Oct 2005 Location: Texas

It still has the I6 in it. I find the 6 has plenty of power to turn the 38.5's and will smoke the tires on the rocks if the need is there.

I have never been to Barnwell Mountain, I mostly wheel in Texas and Logan New Mexico. I am going to start doing some more trips next year..

This was the first trip out in it since November I rolled it end over end on a trail and had to replace the whole front end and 3 of the cage bars. At that time I put 3/16th aluminum on the top of the cage to keep the sun off the driver and passenger.

I will keep you posted on the STAK install and even foward you some pics on the progress and the actual install. I am looking foward to having that in the jeep.

I am going to add a couple more pics of the rear links and the dash I uploaded this morning.

sknuisance · Member Joined: 17 Oct 2005 Location: Texas

So since my last post I have added a Spider 9 in the front, Air Bags, SM465 Transmission, I changed out the Curry High 9 for a True High 9 in the back, I cut off the body after a nasty end over and Tubed it..... 42 Iroks and Walker wheels.... I am sure I am forgetting something

Orangeamc13 · Posted: Sat Feb 06, 2010 4:49 pm Post subject:

Very Nice! thumb up

_________________

sknuisance · Member Joined: 17 Oct 2005 Location: Texas